+click for larger image
+click for larger image
+click for larger image
"Yes I did have the chance to use your rust seal! And I have to admit it is a bit better than the other two leading sellers. It was a hot day and humid too, since I’m in texas, and it went on nice but didn’t tack up for over an hour. But within two hours it was a really nice finish and really secured the little rust area’s very nicely!
I will be ordering another gallon within the next month or so when I go to finish the floors on my camaro. I have attached a photo or two for you.
Great product! Best yet!"
Click HERE for more Customer Photos using KBS Coatings.
“I bought a sail boat that had a leaking fiberglass fuel tank that was integral with the hull of the boat. Therefore it was impossible to remove it. It had been leaking for about 10 years and two previous owners had tried unsuccessfully to repair it from the outside.
I cleaned the tank as per your instructions and dumped the KBS coating material into the bottom of the tank and used a small paint roller to apply the material to the inside of the tank. I removed the excess material from the tank bottom before letting it set up for a week. I put 90 gallons of diesel fuel( that I had removed and stored in drums) back into the tank and am glad to say that there were NO leaks. Your material was easy to apply and repaired the tank exactly as you said it would.
Thank you very much.”
See what others are saying about KBS Coatings here: http://www.kbs-coatings.com/customer-feedback.html
I would just like to say that I am very pleased with your product. the Frame Coater Kit was complete even with gloves. Most importantly, your product did what it claimed it would do which ironically is hard to find nowadays. The product is professional grade but very user friendly.
I have since bought my first car and plan on using your other products to protect the body and frame from rust. As a satisfied customer I promise to recommend your product to others in the future.
See what others are saying about KBS Coatings here: http://www.kbs-coatings.com/customer-feedback.html
