Tank Sealer News

PATIENCE IS A VIRTUE THAT WILL BE REWARDED…

Over the years, one of the BEST TIPS that we can give to people who are sealing a tank is to BE PATIENT. Proper prep and sealing IS NOT a lunch hour project. The KBS 3 Step System works perfectly if the Instructions are followed which includes:

• Be Patient and allow the AquaKlean the time to thoroughly dissolve all the oily fuel residues before rinsing.
• Be Patient and allow the RustBlast to soak and disintegrate the rust in your tank before rinsing.
• Be Patient while waiting for the tank interior to dry completely as the tank can NEVER be too dry!
• Be Patient and allow the tank to cool to room temperature before applying the sealer.
• Be Patient when sloshing the sealer around to insure complete coverage.
• Be Patient when draining any & all excess sealer from the tank.
• Be Patient while waiting for the sealer to cure.

Click HERE for Tank Sealer Instructions.
Click HERE for Tank Sealer Knowledgebase – Search for Answers to your Questions.

“I own an independent Harley Davidson motorcycle repair shop. I have used KBS coatings for a long time and have found your products to be way above the rest.

At the present time I am working on a 1953 Indian Chief restoration. Someone previously used and inferior product to seal the tank. Needless to say it is peeling off inside. I have full confidence the KBS stripper will remove all the old sealer, so I can properly re-seal this tank with the 3 step process. Thus allowing this old Indian Chief to roar to life once again.

I wouldn’t trust anything else but KBS for this valuable antique.”

See what others are saying about KBS Gas Tank Sealer here: http://www.kbs-coatings.com/customer-feedback.html

Check out the Knowledgebase on Tank Sealer here: https://helpdesk.kbs-coatings.com/index.php?_m=knowledgebase&_a=view&parentcategoryid=1&pcid=0&nav=0