Tank Sealer News » Writings

Engine Paint -3 New Colors of Motor Coater

admin — Fri, 13 Aug 2010 15:54:46 +0000

KBS Coatings introduces 3 NEW COLORS of Motor Coater Engine Enamel: Ford Green, Chrysler Blue & Cadillac Dark Blue. This brings our current color choices to 15 with more on the way in the near future.

Motor Coater is easy to apply, offers superb coverage and yields a self-leveling professional looking finish. Your engine will be a show stopper at this DIY price…too bad it’s kept under the hood!

FEATURES OF MOTOR COATER:

Fast-drying
High Performance
Extremely High Gloss
High Quality Acrylic Enamel
Brush Marks Flow Out
Withstands Temperatures up to 450°F
Matches OEM Standards
Will Not Blister, Flake, Crack or Peel
Oil, Transmission Fluid and Gas Resistant
A Pint is Usually Enough to do an Entire Engine


Chevy Orange	Gloss Black	Aluminum	Ford Corporate Blue	Ford T-Bird Red	Pontiac Metallic Blue

White	Hemi Orange	Fire Red	Ford Dark Blue	Daytona Yellow	Velvet Black

Ford Green	Chrysler Blue	Cadillac Dark Blue

Get more information or place your order direct from KBS Coatings: http://www.kbs-coatings.com/motor-coater-kit.html

Customer Feedback on Tank Sealer

admin — Fri, 16 Jul 2010 20:40:10 +0000

I noticed a very strong gasoline smell coming from my garage one day,I Started looking around at all my toys and noticed my motorcycle gas tank was leaking.
I started looking online for a new one(Ebay)first,All I could find was used ones that where dented and beat up for $300.00 to $500.00 range,As my bike is a 1989 they are a rare find.
I then went to some online motorcycle forums to see what other people where doing to fix their tanks and came across the KBS Coatings name as being one of the best repair options out there. There is a few other companys offering tank sealer kits but KBS was rated as a much better product to use. So I ordered the 3 part system kit and was pretty easy to do. The Aquaklean and Rustblast formulas work very well. It started off with a pin hole leak and ended up with roughly 10 more when I was done the 1st two processes,I ended up ordering their NuMetal Epoxy to be sure the holes where filled before sealing was put in. All said and done about 10%cost 0f a new tank,It is a real good deal and very easy process to do.
-drywaller

You can find complete instructions for the Gold Standard Gas Tank Sealer here: http://www.kbs-coatings.com/Gold-Standard-Tank-Sealer-Information-Instructions_ep_39-1.html

You can also find the Fix-It Guide which will help you quickly identify the causes of and the recommended solutions for the most common issues that could occur with Tank Sealer here: http://www.kbs-coatings.com/fix-it-guide-tank-sealer.html

You can also find Instructional Videos here: http://www.kbs-coatings.com/KBS-Videos_ep_90-1.html

You can also find Tank Sealer Flow Charts here: http://www.kbs-coatings.com/Flow-Chart–Tank-Sealer_ep_88-1.html

RustSeal used on Rusty Trailer

admin — Fri, 14 May 2010 16:30:03 +0000

A customer of ours recently sent us these pictures. He has a rusty trailer and he wanted to stop rust and prevent rust. He was so happy with the results that he had to share these pictures with us.

You can find complete instructions for RustSeal here: http://www.kbs-coatings.com/RustSeal-Information-and-Instructions_ep_38-1.html

You can also find the Fix-It Guide which will help you quickly identify the causes of and the recommended solutions for the most common issues that could occur with RustSeal here: http://www.kbs-coatings.com/fix-it-guide-rustseal.html

You can also find Instructional Videos here: http://www.kbs-coatings.com/KBS-Videos_ep_90-1.html

You can also find a Flow Chart for using the KBS 3 Step System here: http://www.kbs-coatings.com/Flow-Chart–RustSeal-on-Steel_ep_87-1.html

KBS Gas Tank Liner Featured in Custom Classic Trucks

admin — Wed, 31 Mar 2010 21:00:32 +0000

KBS Coatings has once again been featured in a national publication: Custom Classic Trucks.

You can view the entire article here: http://www.customclassictrucks.com/techarticles/1004cct_ford_f1_pickup_truck_rusted_gas_tank_repair/index.html

In the article, Ron describes how he used the KBS Auto Fuel Tank Sealer Kit to seal the tank of an F-1.

As always, feel free to grab a copy of the April 2010 edition of Custom Classic Trucks and check out what others are saying about KBS Coatings.

Toyota chooses NuMetal Epoxy Putty

admin — Thu, 18 Mar 2010 15:09:18 +0000

Toyota has chosen KBS NuMetal Epoxy Putty as an essential part of fixing their Accelerator Pedal Recall.

NuMetal Epoxy Putty is an easy-to-use, two-part putty that mixes like clay but hardens like steel! NuMetal bonds, seals, fills, insulates, anchors, caulks and waterproofs. It cures without shrinking or sagging and can be drilled, tapped, sanded, primed and painted. NuMetal will not only stick to damp surfaces, but it will cure underwater!

Our Black NuMetal is ideal for automotive applications … if the surface coating sustains damage, the black epoxy putty beneath remains unseen! Use White NuMetal for marine applications and boat repairs. Satisfaction guaranteed

<< Go Here to Order NuMetal >>

KBS Introduces Hi-Temp Seal – Header Paint

admin — Thu, 21 Jan 2010 21:52:04 +0000

KBS HI-Temp is a high temperature/heat resistant coating formulated specifically to protect metal surfaces operating at temperatures from 500°F (260°C) to 1500°F (812°C).

With proper preparation, Hi-Temp provides outstanding adhesion, film integrity, corrosion, weathering and thermal shock-resistance throughout this entire temperature range, and is guaranteed not to burn off!

Withstands temperatures up to 1500°F
Will not peel, flake, or chalk
Will not burn off

More Info on Hi-Temp>>
Directions and Tech Data for Hi-Temp>>

Gonzo Talks about Tank Sealer Kits..

admin — Wed, 30 Dec 2009 16:34:50 +0000

“I own a 71 Moto Guzzi that I’ve been painstakingly rebuilding. Well, I sent the gas tank out to be pressure tested and sealed prior to doing anything on the bike. I got it back and you could see the coating. Well, after several years and getting the bike painted we got her back together and on our maiden voyage we discovered a leak in the tank. Well what can i do? It’s been several years sense I had it painted. Well a friend told me of your product. I purchased it and after following the directions to the “t” I can’t be any happier. I would and do recommend this product to anybody that has a leak!”

“Your truly a very happy gonzo!”

View more Feedback on Tank Sealer Kits and other KBS Coatings Products HERE.

Find more information on Sealing a Gas Tank HERE.

Mike Talks about KBS Frame Coater Kit

admin — Thu, 10 Dec 2009 15:59:19 +0000

"Frame Coater Kit was just the right amount for two coats top and bottom of tub on a 1965 Toyota Land Cruiser restoration. Great product; easy to use and self leveling characteristic makes it look like I knew what I was doing!"- Mike J.

You can read see more Customer Photos HERE.

Find the Frame Coater Kit – Chassis Paint Kit HERE.

KBS Coatings Introduces DiamondFinish ClearCoat

admin — Wed, 25 Nov 2009 21:30:29 +0000

KBS Coatings introduces the latest to their line of high quality coatings for the Home, Automotive, Marine and Farm Industries.

KBS DiamondFinish ClearCoat is a permanent high solids Clear Coat. It is the latest development in ultra high performance clear coats with very high solids (over 60%) and low VOCs.

DiamondFinish ClearCoat is incredibly tough and hard like no other clear coat on the market. This water clear high gloss clear coat remains permanently flexible and is able to perform in the toughest environments without yellowing, cracking or peeling.

DiamondFinish ClearCoat can be applied with a brush (without leaving any brush marks), roller and conventional spray gun. Unlike normal two part coatings, no hardener is needed. You can just stir and go. DiamondFinish ClearCoat will cure without heat or UV lights in temperatures from 50 to 86 degrees Fahrenheit.

DiamondFinish ClearCoat can be applied directly to a cured Automotive basecoat, Standard solid color paints, and Single Part or Two Part paints. It can also be applied to Non Ferrous metals including Aluminum, Alloys, Brass, Chrome and Copper.

DiamondFinish ClearCoat is able to withstand the harshest of chemicals including fuels, solvents, Battery acid, Brake fluid, Ethanol, Methanol, MEK, Hydrochloric Acid, Fertilizers, and Acetone. Because DiamondFinish ClearCoat is so resistance to these materials, that means Graffiti just won’t stick and can be removed simply with a solvent soaked rag.

DiamondFinish ClearCoat is able to perform in the high temperature automotive applications including the use on cylinder heads, engine blocks, brake components and even inlet manifolds, without yellowing up to 325 degrees Fahrenheit.

Give KBS DiamondFinish ClearCoat a try today and you will not be disappointed. We guarantee it or your money back.

To order or for more information: http://www.kbs-coatings.com/diamondfinish-clearcoat.html

Tip of the Month – Tank Sealer

admin — Thu, 22 Oct 2009 18:03:19 +0000

PATIENCE IS A VIRTUE THAT WILL BE REWARDED…

Over the years, one of the BEST TIPS that we can give to people who are sealing a tank is to BE PATIENT. Proper prep and sealing IS NOT a lunch hour project. The KBS 3 Step System works perfectly if the Instructions are followed which includes:

Be Patient and allow the AquaKlean the time to thoroughly dissolve all the oily fuel residues before rinsing.
Be Patient and allow the RustBlast to soak and disintegrate the rust in your tank before rinsing.
Be Patient while waiting for the tank interior to dry completely as the tank can NEVER be too dry!
Be Patient and allow the tank to cool to room temperature before applying the sealer.
Be Patient when sloshing the sealer around to insure complete coverage.
Be Patient when draining any & all excess sealer from the tank.
Be Patient while waiting for the sealer to cure.

Click HERE for Tank Sealer Instructions.
Click HERE for Tank Sealer Knowledgebase – Search for Answers to your Questions.