As every painting professional knows, the keys to any long lasting paint job are good surface prep and the use of quality materials. Our complete KBS Motor Coater Kit was developed to guarantee just that!

Included in each kit is our renowned KBS products AquaKlean & RustBlast formulated to achieve that professional prep ensuring maximum adhesion. And finally, our KBS Motor Coater Engine Enamel will provide that tough durable finish with superior heat & chemical resistance.

Motor Coater is easy to apply, offers superb coverage and yields a self-leveling professional looking finish. Your engine will be a show stopper at this DIY price…too bad it’s kept under the hood!

The Motor Coater Kit includes everything you need to do the job The Right Way!

• Quart – AquaKlean
• Quart – RustBlast
• Pint – Motor Coater (any color)
• 8oz. – #1 Thinner
• Black Lightning Gloves
• Brush
• Stir Stick
• Complete and Detailed Instructions

Chevy Orange: 55′, 57′-75′ V-8"s
Ford Corporate Blue: 67′-on with 302 Engine
Pontiac Metallic Blue: 66′-72′
Street Hemi Orange: 66′-71′ 426 Street Hemis, 70′-71′ 383 & 440 Hi-Performance, 70′-71′ 340
Race Hemi Orange: 62′-64′ 413 & 426 Max Wedge, 64′-65′ 426 Race Hemis
Ford Dark Blue: 41′-48′
Chrysler Blue: 73′-83′
Cadillac Dark Blue: 49′-76′

*Colors will vary based on your monitor settings.

Click HERE for more Info
or to Order the Motor Coater Kit

Used by professionals worldwide, Gold Standard Fuel Tank Sealer is a superior, one part, ready-to-use fuel tank sealer that is specifically formulated to stop rust and corrosion. When used in combination with AquaKlean and RustBlast, it will form a super-tough, fuel and alcohol impervious coating, while simultaneously sealing small pinholes and weld seams. It’s been rated as the industry’s NEW Gold Standard in gas tank sealers.

Gold Standard Tank Sealer may be used on steel, aluminum, and fiberglass tanks.

Applications: Gas Tanks, Diesel Tanks, Oil Tanks, Utility Tanks, Motorcycle Tanks, 4-Wheeler Tanks, Tractor Tanks, Generator Tanks and many others…

Available in Convenient Kits for most sizes of tanks!

+CHECK OUT THE KBS TANK SEALING KITS

CAUSE:

Liquid solvent (thinners/reducers) becomes "trapped" in the paint film when the surface layer skins over too quickly, preventing their evaporation into the atmosphere. Solvents that vaporize within the paint film leave bubbles, pinholes or craters as they push through and "pop" the surface. Solvents can be trapped due to:

1. Excessive film thickness from puddling in tank.
2. Too hot and/or too humid atmospheric conditions.
3. Too hot/warm tank conditions.
4. Moisture remaining in tank.

REPAIR:

1. Allow surface to completely cure and reevaluate.
2. Strip out and remove using KBS Strip. Repeat AquaKlean, RustBlast, and Gold Standard Tank Sealer steps.

PREVENTION:

• Allow tank to reach room temperature before applying sealer.
• Do not attempt to apply sealer in direct sunlight, as tank surface and inside air will be too warm.
• Drain out excess sealer.
• Avoid allowing coating to puddle/pool inside tank.
• Avoid too hot/humid atmospheric conditions (ideal = 55°-82°F/13°-28°C)
• Do not allow tank to "cure or dry" in direct sunlight.
• Keep tank away from heat while curing.

Check out all of our Tank Sealer Fix-It Guides here: http://www.kbs-coatings.com/fix-it-guide-tank-sealer.html