MACHINERY RUST PREVENTION IN SAFETY BLUE

KBS RustSeal is a superior one part, completely non-porous, ready-to-use paint.

KBS RustSeal is a high-solid content, rust preventive coating, that is actually strengthened by exposure to moisture.

KBS RustSeal is impervioaus to road salts and most every chemical.

KBS RustSeal flows out to a beautiful, rock-hard, tough coating that is tough to chip or scratch. These exceptional properties make RustSeal specifically formulated to prevent corrosion and stop rust.

KBS RustSeal completely seals metal surfaces, blocking all the pores and preventing penetration of moisture, oxygen, and water vapor. Try some today…you’ll be amazed!

Features:

• CAN BE APPLIED DIRECTLY OVER RUST!

• SEALS & ENCAPSULATES RUST AND POROUS SURFACES

• APPLY BY BRUSH, ROLLER, OR SPRAY.

• SUPER STRONG AND FLEXIBLE – HAMMER TOUGH!

• HIGHLY RESISTANT TO MOST CHEMICALS

• MODERATE UV STABILITY, UNLIKE OTHERS WHICH CAN CHALK WITHIN WEEKS

• COMPATIBLE WITH ALL PAINT SYSTEMS

• COMPLETELY NON-POROUS

+CHECK OUT SAFETY BLUE RUSTSEAL

APPLY RUSTSEAL IN THIN COATS

Remember that RustSeal should be applied in THIN coats. Applying too heavily, will cause running and/or sagging on vertical surfaces, and possible bubbling on horizontal surfaces. As RustSeal cures, it releases a small amount of carbon dioxide. If allowed to “puddle”, the top of the RustSeal directly exposed to the ambient humidity in the air (the actual catalyst for RustSeal) will begin to "skin" over. This "skinning over" is much like that of chocolate pudding and blocks the release of the afore mentioned carbon dioxide causing bubbles. By applying thin coats, this film cures through and through all at once.

MORE TIPS & TRICKS

RustSeal Fix-It Guide: This guide helps you quickly identify the causes of and the recommended solutions for the most common issues that could occur for RustSeal.

Note: We would love for you to share your tips with us.
Email us (suggestions@kbs-coatings.com) with your tips.

One of our customers uses Cat Yellow RustSeal as a safety yellow paint on the machinery at thier shop. They really like the RustSeal and sent us some pictures to show us the Cat Yellow RustSeal in action.

FEATURES OF RUSTSEAL – THE BEST STOP RUST PAINT

• CAN BE APPLIED DIRECTLY OVER RUST!
• SEALS & ENCAPSULATES RUST AND POROUS SURFACES
• APPLY BY BRUSH, ROLLER, OR SPRAY.
• SUPER STRONG AND FLEXIBLE – HAMMER TOUGH!
• HIGHLY RESISTANT TO MOST CHEMICALS
• MODERATE UV STABILITY, UNLIKE OTHERS WHICH CAN CHALK WITHIN WEEKS
• COMPATIBLE WITH ALL PAINT SYSTEMS
• ALL COLORS ARE COMPLETELY NON-POROUS

MORE INFORMATION AND DIRECTIONS ON RUSTSEAL

At KBS Coatings, we believe that offering the best Rust Preventive products is simply not enough. We alse believe in offering the best world-class customer support for using and applying all of our superior Rust Preventive products.

+Click Here for the KBS 3 Step System featuring KBS RustSeal

+Click Here for KBS RustSeal Complete Directions

+Click Here for the KBS RustSeal Flow Chart

+Click Here for KBS RustSeal Instructional Videos

+Click Here for KBS RustSeal on the KBS Suppot Forum

+Click Here for How To’s showing the application of KBS RustSeal

+Click Here for the KBS RustSeal Fix-It Guide

+Click Here for the KBS HelpDesk featuring Questions & Answers on KBS RustSeal

Put a piece of tape behind the larger pinholes, then paint with 2 coats of RustSeal. When the RustSeal dries, pull the tape off and coat the the back side with RustSeal as well.

Note: We would love for you to share your tips with us. Email us (suggestions@kbs-coatings.com) with your tips.

"We used a product called RustSeal from KBS Coatings because we’ve found it to be perfect for painting the chassis of cars that are driven since it requires a minimum of preparation and it’s tough as nails so it resists chipping. For those without the ability to spray paint, most KBS products can be brushed and flow out without any brush marks."

See what else the May 2011 Street Rodder Magazine had to say about KBS Coatings.

Our Newest Completely Non-Porous Rust Preventive Paint

Cat Yellow RustSeal is a full spec industrial yellow with micronized corrosion barrier pigments in a color well recognized on any work site as Cat Yellow. Heavy vehicle maintenance will never be the same!

KBS RustSeal is a superior one part, ready-to-use, high-solids content, rust preventive coating, that is actually hardened by exposure to moisture. It is impervious to road salts and most every chemical. RustSeal flows out to a beautiful, rock-hard, tough ceramic-like coating that is tough to chip or scratch, and will not crack or peel. Get some for your project today!

+FOR MORE INFORMATION OR TO ORDER

+click for larger image

+click for larger image

"Yes I did have the chance to use your rust seal! And I have to admit it is a bit better than the other two leading sellers. It was a hot day and humid too, since I’m in texas, and it went on nice but didn’t tack up for over an hour. But within two hours it was a really nice finish and really secured the little rust area’s very nicely!

I will be ordering another gallon within the next month or so when I go to finish the floors on my camaro. I have attached a photo or two for you.

Great product! Best yet!"

Click HERE for more Customer Photos using KBS Coatings.

I have since bought my first car and plan on using your other products to protect the body and frame from rust. As a satisfied customer I promise to recommend your product to others in the future.

See what others are saying about KBS Coatings here: http://www.kbs-coatings.com/customer-feedback.html

Buy four quarts of RustSeal to maximize your savings and avoid waste. Best buy for multiple larger size projects. Each RustSeal quart provides 2 coats of coverage for an approx. 50 sq. ft. area. Mix or match colors.

Click HERE for more information on the Convenience Gallon – 4 Quart Special.

TIP OF THE MONTH

Do you always seem to have paint peeling from your wood windowsills, doors, door frames or thresholds…no matter what you do? The key is to permanently waterproof & seal the wood surface using RustSeal. Yes, RustSeal will stop the damaging effects of water penetration not only for metal but wood as well. Just scrape off the old coating, make sure the wood is bone dry & apply a couple of coats of RustSeal.  RustSeal loves to seep into and adhere to porous surfaces and wood is no exception.  Your woodwork will look great and have a rock hard nonporous coating permanently resistant to moisture, mold & mildew! As always, topcoat RustSeal with your own paint color if directly exposed to UV rays.

For more information or to order, click HERE …

“I have used the Rust Seal coating and the epoxy putty with great results from both. I have found the consistency of the Rust seal better than another Stop Rust Coating I have been using for over 10 years. Your product flows and covers better, seems to be a higher solids coating.”
- Mike M.

“My boys have bikes that have truly taken a beating with the beach weather! I can’t afford to buy the boys new bikes, that would cost me a small fortune! So, I decided to try out this KBS system. The boys and I decided to just dive into it and see where it took us. Much to my delight, it was an incredible experience. This system was so easy to use, and the end results are beautiful! My boys actually love their bikes more now than they ever did! Keep up the great work KBS!!”
- Kelli D.

See what other are saying here: http://www.kbs-coatings.com/customer-feedback.html